14
Press CURSOR
f
.
The version of the boot loader(network-μ Processor).
Press CURSOR
f
.
The version of the image(network-μ Processor).
4. Product Mode 1
Startup display
"Product Mode1" displayed for 5 seconds.
Tested during production to perform the following settings automatically.
Tunner Preset, WiFi.
To exit this mode, unplug the power cord.
5. Product Mode 2
Startup display
"Product Mode2" displayed for 5 seconds.
Tested during production to perform the following settings automatically.
Auto Standby :1 minutes
Auto Standby to set up and will stand under the following conditions.
Auto Standby Conditions
USB/iPod : No Connection or continue no operation and Stop state.
Network : No Connection or continue no operation and Stop state.
To exit this mode, unplug the power cord.