Denon DNP-720AE - Page 18

18
(
9
) Check MAC Address.
MENU → Network → Network Info → MAC Address
(10) The back panel of the unit, MAC Address seals, please change new one.
Please conrm the MAC Address display is corresponding to the seal.
(11) Plug the power cord into a power outlet while pressing "SOURCE" button and "CURSOR
f
" button simultaneously.
(Fuctory Reset)
--- Cautions on Firmware Update ---
• In order to update the rmware, you must have the correct system requirements and settings for a broadband Internet
connection.
• Do not turn off the power until updating is completed.
Even with a broadband connection to the Internet, approximately 1 hour is required for the updating procedure to be
completed.
Once updating starts, normal operations on the DNP-720AE cannot be performed until updating is completed.
Also, setting items may be initialized.
Note down the settings before updating, and set them again after updating.