Denon DRA-275RD - Page 24

SEE
DRA-375AD/275SRO/27
5
RR
ee
24
NOTE FOR PARTS LIST
@ Part indicated with the mark "©" are not always in stock and possibly to take a long period of time for supplying, or in
some case supplying of part may be refused.
@ When ordering of part, clearly indicate "1" and "I" (i) to avoid mis-supplying.
@ Ordering part without stating its part number can not be supplied.
@ Part indicated with the mark "*" is not illustrated in the exploded view.
@ Not including Carbon Film +5%, 1/4W Type in the P.W.Board parts list. (Refer to the Schematic Diagram for those parts.)
WARNING:
Parts marked with this symbo! A\ IIE have critical characteristics.
Use ONLY replacement parts recommended by the manufacturer.
@ Resistors @ Capacitors
Ex: RN 14K 2E 18 G ER Ex: CE QO4W 4H eRe OM BP
Type Shape Power Resist- Allowable Others Type Shape Dielectric Capacity Allowable Others
and per- and per- strength error
formance formance
‘Carbon : : : Pulse-resistant type : Aluminum foil F 241% : High stability type
: Composition 4 : : Low noise type electrolytic
:
Metal
oxide
fitm
:
:
:
Non-burning
type
:
Aluminum
solid
G
:t2%
:
Non-polar
type
: Winding $ $ : Fuse-resistor electrolytic
: Metal film 2 2 : Lead wire forming : Tantalum electrolytic J 248% : Ripple-resistant type
: Metal mixture 2 Film K :+10% : For change and discharge
: Ceramic M :+20% : For assuring high
frequency
: Ceramic Z :+80% : UL part
: Oil -20% : CSA part
*
Resistance
:
Mica
P
:+100%
:
UL-CSA
type
18 2 => 1800 ohm = 1.8 kohm : Metallized -0% : Lead wire forming
t Indicates number of zeros after effective number. : Metallized C :20.25pF
2-digit effective number. O : 20.5pF
© Units: ohm = : Others
1B = 1.2 0hm
t $72 1-digit effective number. * Capacity (electrotyte only)
2-digit effective number, decimal point indicated by R. 2.2 2 = 2200yF /
Units: ohm t—__ Indicates number of zeros after effective number.
2-digit effective number.
¢ Units: pF.
28 2 =>) 2.2pF
t +. 1-digit effective number.
2-digit effective number, decimal point indicated by R.
¢ Units: pF.
%* Capacity (except electrolyte)
2 = 2200pF=0.0022uF
22
t 4— (More than 2)—Indicates number of zeros after effective number.
2-digit effective number.
© Units: pF.
221 = 220pF
t *(0or 1) Indicates number of zeros after effective number.
2-digit effective number.
¢ Units: pF.
e When the dielectric strength is indicated in AC, "AC* is included after the dieelectric
strength value.