Denon DRA-700AEDAB - iPod and Multi-Zone Connectivity

Connections Connections
9
ENGLISH
Connecting the iPod
®
iPod
ASD-1R
A
AUDIO OUT
RR
L L
When using an iPod, you must connect the Control Dock for iPod (ASD-1R, sold separately) and the DOCK
CONTROL jack on the DRA-700AE/700AEDAB with a mini-jack and assign the iPod to any AUDIO
terminal(s).
The diagram below shows an example of connections for when the iPod is assigned to the CD-R/TAPE
terminals.
For instructions on assigning the iPod to a specific terminal, see “Setting the iPod Assignment” (
page 21).
For instructions on playing the iPod, see “Playing the iPod” ( page 21).
• The optional standard Control Dock for iPod is DENON ASD-1R sold separately.
ENGLISH
Monitor (S VIDEO IN)
Connecting the MULTI ZONE terminals
Monitor
(ZONE2)
VIDEO
IN
AUX OUT
Power amplifier
(ZONE2 or ZONE3)
R
L
IN
G
R
L
R
L
A
+
+
Extension terminal for future use.
Infrared sensorInfrared retransmitter
For instructions on operations using the MULTI ZONE functions ( page 23).
ZONE2 (or ZONE3) PRE OUT connections
• If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 (or ZONE3) pre-
out (variable or fixed level) terminals can be used to play a different program source in ZONE2 (or
ZONE3) the same time ( page 23).
• The ZONE2 video out is only for the ZONE2.
• The ZONE3 video out is only for the ZONE3.
Monitor
(ZONE2 or ZONE3)
Power amplifier
(ZONE2 or ZONE3)
• For the AUDIO output, use high quality pin-plug cables and wire in such a way that there is no humming
or noise.
• For instructions on installation and operation of separately sold devices, refer to the devices’ operating
instructions.
Input Output