Denon DRA-700AEDAB - Connections; Cable Indications and Signal Flow

Getting Started
5
ENGLISH
ZONE select switch········(24)
Volume control
buttons····························(24)
ZONE ON/OFF
buttons····························(24)
BAND button ··················(13)
Function buttons············(24)
¢ ZONE remote control unit (RC-1056)
Number buttons
(0 ~ 9)·······························(13)
Memory block
buttons (A ~ G)···············(13)
ENGLISH
Audio cable
Cable indications
The hookup diagrams on the subsequent pages assume the use of the following optional connection
cables (not supplied).
NOTE:
• Do not plug in the power supply cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with speaker cables. Doing so could result in humming or noise.
Connections
Analog connections (Stereo)
A
R
L
R
L
Pin-plug cable
(White)
(Red)
Speaker connections
C
Speaker cable
Analog connections (Monaural, for subwoofer)
B
Pin-plug cable
Video connections
D
Video cable (75 Ω/ohms video pin-plug cable)
(Yellow)
Signal direction
Audio signal
OUT ININ OUT
Video signal
OUT ININ OUT
Video cable
The button does not function with
the DRA-700AE/700AEDAB.
(Nothing happens when they are
pressed.)