EasyManua.ls Logo

Denon DRA-F101 - Safety Precautions; Leakage Current Check; Specifications; Power Amplifier Section

Denon DRA-F101
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
DRA-F101
SPECIFICATIONS
POWER AMPLIFIER SECTION
Rated Output Power: 35W + 35W (4 /ohms, DIN, 1 kHz, T.H.D. 0.7%)
Output terminals: 4 to 16 /ohms
PRE AMPLIFIER SECTION
PHONO EQ Amp Rated Output: 150 mV (Recout Terminal)
Input Sensitivity/Input Impedance: PHONO: 2.5 mV/47 k/ohms
CD, DVD/AUX, TAPE, MD: 300 mV/47 k/ohms
RIAA Deviation: PHONO: 20 HZ to 20 kHz ±0.5 dB
OVERALL CHARACTERISTICS
SN Ratio (IHF A Network): PHONO: 80 dB (at 5 mV input) (input terminals shout-circuited)
CD, DVD/AUX, TAPE, MD: 90 dB (SOURCE DIRECT: ON)
Frequency Response: 5 Hz to 80 kHz: +0.5, 3 dB (SOURCE DIRECT: ON)
Tone Control Adjustable Range: BASS: 100 Hz ±8 dB
TREBLE: 10 kHz ±8 dB
LOUDNESS: 100 Hz +8 dB
10 kHz +6 dB
TUNER SECTION
Reception frequency range: FM: 87.50 MHz~108.00 MHz
AM: 522 kHz~1611 kHz
Practical sensitivity: FM: 1.2 µV/75 /ohms (12.8 dBf)
AM: 18 µV
FM stereo isolation: 40 dB (1 kHz)
FM S/N ratio: Monaural: 74 dB Stereo: 70 dB
FM harmonic distortion: Monaural: 0.3% Stereo: 0.4%
CLOCK/TIMER SECTION
Clock system: Power source frequency synchronization system
Clock precision (per month): ±30 seconds
Timer functions: Everyday timer (1 setting)
Once timer (1 setting)
Sleep timer (maximam 60 min.)
OTHERS
Power supply: AC 230 V, 50 Hz
Power consumption: 85 W
(Approx. 1 W in standby mode)
Dimensions: 250 (W) × 81.5 (H) × 285 (D) mm
Net Mass: 3.5 kg
REMOTE CONTROL UNIT (RC-927)
Remote control system: Infrared pulse system
Power supply: 3 V DC, Two size R03 ("AAA")
dry cell batteries
External dimensions: 48 (W) × 210 (H) × 29 (D) mm
Mass: 120 g (including batteries)
* For improvement purposes, specifications and functions are subject to change without advanced notice.
SAFETY PRECAUTIONS
The following check should be performed for the continued protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.

Other manuals for Denon DRA-F101

Related product manuals