Denon DRA-F101 - Tuner Pack Removal; Power PWB and Heat Sink Removal; Shield Plate, Back Panel, and Main PWB Removal

4
DRA-F101
5. Tuner Pack
(1) Disconnect the FFC.
(2) Remove 3 screws
7
.
7. Shield Plate, Back Panel, Main P.W.B.
(1) Remove 2 screws
9
, 7 screws

, and 1 screw

to detach
the Back Panel.
(2) Remove 2 screws

to detach the Shield Plate.
(3) Remove 1 screw
!
, 2 screws
"
and release P.W.B. holder
to detach the Main P.W.B.
6. Power P.W.B., Heat Sink
(1) Remove 4 screws
8
.
(2) Detach the Power P.W.B. and Heat Sink
to the arrow direction.
Shield Plate
Tuner Pack
7
FFC
!

Heat Sink
Power P.W.B.
8
8
"


9
9


"
P.W.B. Holder
Back Panel
Main P.W.B.