6
DRA-F107 / DRA-F107DAB
CAUTION IN SERVICING
Initializing DRA-F107/DRA-F107DAB
DRA-F107/DRA-F107DAB initialization should be performed when the μcom, and peripheral parts of μcom are replaced.
1. Switch off the unit and remove the AC cord from the wall outlet.
2. Hold the following the 0 button and the AUTO PRESET button, and plug the AC cord into the outlet. d
Note:・ All user settings will be lost and this factory setting will be recovered when this initialization mode.
So make sure to m+emorize your setting for restoring after the initialization.
To Next Page
Loading...
