7
DRA-F107 / DRA-F107DAB
SPECIAL MODECD TEST MODE
No Button name Function Display
S1
Version No.
Display Mode
S1.1
・
Plug AC cord into power outlet while pressing
the ON/STANDBY button and the SDB/
TONE button same time on Main Unit.
・The Version number of MPU is displayed.
・MUTING ON
・
Unplug AC cord to clear this mode.
***** :The version number of Main MPU
S1
Version No.
Display Mode
S1.2
※ When the iPod Dock is connected
・ Plug AC cord into power outlet while pressing
the ON/STANDBY button and the SDB/
TONE button same time on Main Unit.
・The Version number of MPU is displayed.
・MUTING ON
・
Unplug AC cord to clear this mode.
***** :The version number of MPU
++++ :The version number of iPod Dock
S2
VFD checking
mode
・ Plug AC cord into power outlet while pressing
the ON/STANDBY button and the AUTO
PRESET button same time on Main Unit.
・All segment of FLD is turning on and off every
one second .
・MUTING ON.
・Unplug AC cord to clear this mode.
・All segment turn on and off.
S3
EEPROM
testing Mode
・Plug AC cord into power outlet while pressing
the ON/STANDBY button and the TUNER
button same time on Main Unit.
・ON / STANDBY LED lighted ORANGE (The
test is started).
・MUTING ON.
・When power LED lighted Green, this
EEPROM test was OK.
・When power LED lighted RED, this EEPROM
test was NG.
・Unplug AC cord to clear this mode.
S4
Cold start mode
(Initialization)
・Plug AC cord into power outlet while pressing
the AUTO PRESET button and the
0 button
same time on Main Unit.
・The system is reset.
- source : CD/USB
- SDB : OFF
- BASS : 0
- TREBLE : 0
- BALANCE : CENTER
- DIMMER : 100%
- VOLUME : 0
- Preset Frequency of TUNER:
All 0
- Main Unit
0/1 button:
-/+ button for PRESET
- CLOCK : 00:00(Flashing)
:
AM12:00(Flashing)(E3)
- TIMER(EVERYDAY/ONCE):
Timer Function : CD
Timer start time : 0:00 (AM12:00 : E3)
Timer stop time : 0:00 (AM12:00 : E3)
・The system is reset, and once this is com-
pleted the unit is set to the normal mode.
To Next Page
Loading...
