.'-:j
B--J
Pr~
METER.
The indicator of the sel.ected channel meter turns green and the
outPlit level
of
the selecte<f chaO/iel is indicated on the meter.
Select the channel to display
on
the channel level meter
-
- Channels for which
Input
selectswiteh
is set to "OFF" are skipped.
-In
the case of bi-amp connection, the indicator of the input-side
channel meter of the selected channel pair turns green.
.In
the case of a bridge connection, the indicator of the channel meter
of the selected channel pair turns green.
Turning the Power
Off
Press
POWER.'
.,
.
'.
'.
>
'"
.••.•
/..
'.J'
','
...
.
••.
1.rhe
power ind.icator lights,
red
and the
power
)s
set
to
the
,~tandby
mode." . . .
Turning the Power On
Operations
2
Press
ONISTANDBY~
.
The power indicator flashes in green for several seconds and the
power
is turned
on.
.
-kril,.
Before tuning
on
the power, lower the sound volume of the connected
equipment.
(j)Press
ON/STANOBY.
The power
is
set to the standby mode.
@Press
POWER.
The power indicator turns off,
and
so
does the power.
-@!.ji-
Power continues to be supplied to some of the circuitry even when the
power
is
in
the standby mode. When leaving home for long periods of
time or when traveling, either press
POWER
to turn off the power, or
unplug the power cord from the power outlet.
(;;:
....
;
....
~]I-W-ER---,;=r--ETI=:J-E"""TR--M-ET-J~NJOFF
ON/STANDBY
C)
;..
IFront
panel]
""
~
-
=;
~
I
Set
the
channel level
meter
S8t
0r,/OFF
vf
all
~lli"
Inel
18V81
fT1tit81
S
rressMETER
ON/OFF
..
~".'>.i1;
.
.'
011$:*;
The channel level meter is illuminated and the channel
~~="~
level meter operates. . . .
• : The channel level meter illumination and the channel
meter indicator turn
off
and the channel level
meter
does
not
~.rate
.
•
The
PRE
AMP
CONTROL LINK indicator goes off if set to "OFF"
with
the AVP-A1
HOCI
connected
to
the control link.
13
To Next Page
Loading...
