Before using this unit. the following steps should
be
followed. according to the situation in which the unit will be used.
I
"Connection and Settings"
(l3Fpage
5)
"Connectingthe External Controller"
(l3Fpage
12)
• Normal Connections
(l3Fpage
9)
• Bi·Amp Connections
(l3Fpage
10)
• Bridge Connections
(l3Fpage
11)
Set the control method
Set the operation mode and input mode,
then connect the speakers
All setup options are carried out
using the
AVP-A
1
HDCI
setup
menu. ("Connect to AVP-A1HDCI"
(l3Fpage
7))
"OPTION/1/2 mode selection"
(l3Fpage
6)
Preparations
,:;;
!*
Note
-
*
IgCJgl
*
~
I---
. . .
".
.
~
Cautions
on
Installation
Wall
Note:
For proper heat dispersal,
do
not install this unit
in
a confined
space,
such
as a bookcase or similar enclosure.
-N,n-
• Since this unit
is
very
heavy,
when installing it
on
a
rack
etc, the
maximum
load
capacity of the
rack
should always
be
checked first.
Please refer to the user manual for the
rack
for the maximum
load
capacity.
• Always have at least
two
people work together to move the
POA-
A1HDCI.
Operations ("Operations" (l3Fpage 13))
2
To Next Page
Loading...
