Turning the power on
1
Press POWER X to turn on power to the unit.
0
You can also switch the power to standby by pressing X on the main unit.
Selecting the input source
1
Press the input source select button to be played back.
The desired input source can be selected directly.
0
You can also select the input source by pressing SOURCE on the main unit.
0
Press the TUNER button again while the source is set to Tuner to switch the (FM–
DAB) band.（RCD-M40DAB only）
Contents Connections Playback Settings Tips Appendix
26
Front panel Display Rear panel
Remote
Index
To Next Page
Loading...
