Listening to DIGITAL IN
1
Prepare for playback.
Check the connection, then turn on this units.
2
Press “OPTICAL IN1” or “OPTICAL IN2” to select
DIGITAL IN.
3
Play the component connected to this unit.
0
Only 2-channel linear PCM digital audio signals can be inputted through the
DIGITAL IN connector of this unit.
Listening to ANALOG IN
1
Prepare for playback.
Check the connection, then turn on this units.
2
Press ANALOG IN to select “ANALOG IN”.
3
Play the component connected to this unit.
Contents Connections Playback Settings Tips Appendix
48
Front panel Display Rear panel
Remote
Index
To Next Page
Loading...
