Operation buttons Function
1/3
Playback / Pause
2
Stop
8 9
Skip to previous track / Skip to next track
6 7
(Press and hold)
Fast-reverse / Fast-forward
0 – 9, +10 Select the track
RANDOM
Random playback
0
Can be set during stop.
REPEAT
Repeat playback
0
Switching between Single-track repeat
and All-track repeat.
INFO Switching the elapsed time display.
Playing tracks in a specific order
(Program playback)
1
In the stop mode, press PROGRAM.
“PGM” is displayed.
2
Use 0 – 9, +10 to select the tracks.
GExampleH
To program tracks 3, 12, 7 to play in that order: Press PROGRAM, 3,
+10, 2, 7.
3
Press 1/3.
0
The program is cleared when the disc tray is opened or the power is turned off.
0
In the stop mode, press CLEAR, the last track programmed is cleared.
Press 9 to select the track you want to delete.
0
In the stop mode, press PROGRAM, clear the all programmed track.
0
Up to 25 tracks can be programmed.
0
When RANDOM is pressed during program playback, the programmed tracks are
played in random order.
0
When REPEAT is pressed during program playback, the tracks are played
repeatedly in the programmed order.
Contents Connections Playback Settings Tips Appendix
29
Front panel Display Rear panel
Remote
Index
To Next Page
Loading...
