Listening to music on an iPod
1
Connect the iPod to the USB port. (v p. 20)
When you connect iPod to the USB port, the input source
automatically switches to “iPod/USB”.
2
Press iPod/USB to switch the input source to “iPod/
USB”.
“From iPod” is displayed on the display of this unit.
3
Operate iPod itself directly while seeing the iPod
screen to play back music.
0
The iPod display modes include “From iPod” and “On-Display”. By default, “From
iPod”, where you directly operate the iPod itself while looking at the iPod screen, is
set.
0
To change to “On-Display” where operations are performed while the iPod
information is displayed on this unit, see “Setting operation mode (“On-Display”
mode)” (v p. 44).
NOTE
0
Depending on the type of iPod and the software version, some functions may not
operate.
0
Note that Denon will accept no responsibility whatsoever for any problems arising
with the data on an iPod when using this unit in conjunction with the iPod.
Contents
Connections Playback Settings Tips Appendix
43
Front panel Display Rear panel
Remote
Index
To Next Page
Loading...
