Denon RCD-M40

Adjusting the tone
1
Press SDB/TONE to select the tone parameter to be
adjusted.
2
Use o p to adjust the “SDB”, “BASS”, “TREBLE”,
“BALANCE” or “S.DIRECT”.
n
SDB (Super Dynamic Bass)
Emphasizes the bass sound when the Super Dynamic Bass (SDB)
function is set to ON (maximum +8 dB).
ON / OFF (Default: OFF)
n
Bass
Adjusts the bass sound.
–10dB – +10dB (Default : 0dB)
n
Treble
Adjusts the treble sound.
–10dB – +10dB (Default : 0dB)
n
Balance
Use op to adjust the left/right volume balance.
n
S.DIRECT (Source Direct)
The tone is not adjusted.
ON / OFF (Default: OFF)
Contents Connections Playback Settings Tips Appendix
50
Front panel Display Rear panel Remote Index