Why won't my Denon S-52 play MP3 or WMA files?
If your Denon Media Converter can't play MP3 and WMA files, the file formats, extensions, or settings used when creating the disc might not be compatible with the S-52. Create discs with compatible file formats, extensions, or settings.
Why does my Denon Media Converter say 'No Disc' even when a CD is loaded?
If the display shows “No Disc” even though a CD is loaded, it might be that the disc is not properly loaded. Reload the disc.
What to do if my Denon Media Converter won't turn on?
If the display is not lit and no sound is produced on your Denon Media Converter when the power switch is on, ensure the power cord is securely plugged into the wall power outlet.
What to do if my Denon S-52 cannot play files on a USB memory device?
If files on a USB memory device cannot be played, check that the USB memory device is in FAT16 or FAT32 format. Note that when divided into multiple partitions, only files stored in the top partition can be played. Ensure the files are in a compatible format and are not copyright protected. Set the format to FAT16 or FAT32. When divided into multiple partitions, only files stored in the top partition can be played. Record the files in a compatible format. Files that are copyright protected cannot be played on this set.
What to do if my Denon S-52 cannot find the server, or it is not possible to connect to the server?
If the server is not found or you can't connect to it, ensure that the computer's or router's firewall is not activated. Also, verify that the computer is turned on, the server is running, and the set's IP address is correct. Check the computer's or router's firewall settings, turn on the power, launch the server, and check the set's IP address.
What to do if my Denon Media Converter display is not lit and sound is not produced when the power switch is set to on?
If the display is not lit and no sound is produced when the power switch is on, the power cord may not be plugged in securely. Plug the power cord into the wall power outlet.
How to troubleshoot network connection issues on a Denon S-52 Media Converter?
If you cannot connect your Denon Media Converter to the network, verify that the SSID and network key (WEP) settings are correct. If the reception is poor, try moving the unit closer to the wireless LAN access point, removing obstacles, and keeping it away from microwave ovens and other networks' access points. If there are multiple networks, adjust the access point's channel settings or connect using a network cable.
Why can't my Denon S-52 connect to the server?
If your Denon Media Converter can't find the server or connect to it, check these items: * The computer’s or router’s firewall settings. * Ensure the computer is powered on. * Verify that the server is running. * Confirm the set’s IP address is correct.
What to do if Denon Media Converter won't play files from USB?
If your Denon Media Converter isn't playing files from a USB memory device: * Ensure the USB device is formatted as FAT16 or FAT32. * If the device has multiple partitions, only files in the top partition can be played. * Confirm the files are in a compatible format. * Note that copyright-protected files cannot be played.
Why can't I play internet radio on my Denon Media Converter?
If you're unable to play internet radio on your Denon Media Converter, check the following: * Verify that the Ethernet cable is properly connected and your network is active. * Confirm that the radio program is broadcast in a compatible format (MP3 or WMA). * Examine your computer's or router's firewall settings. * Ensure the radio station is currently broadcasting. * Check the set’s IP address.
Checks for electrical safety and laser radiation compliance.
Important safety warnings and precautions for servicing.
Description of the initial value for laser drive current.
Procedure to check Iop and the replacement criterion.
Process for replacing the traverse unit.
Method for checking laser current (Iop) in test mode.
Precautions to prevent laser diode damage during handling.
Procedure for replacing the traverse unit based on Iop check.
Steps to diagnose and resolve LCD display problems.
Troubleshooting steps for playback and audio output problems.
Steps to diagnose and resolve connectivity problems.
Comprehensive lists of components for various PWB units.
Schematic showing connections for the S-32 model.
Schematic showing connections for the S-52 model.
Guidelines for checking waveforms on the FEP and test points.
Diagrams showing expected waveforms for RF, CD loading, CD play, and power amp signals.
Detailed circuit diagrams for the main unit and its blocks.
General| RMS rated power | 20 W |
|---|---|
| Connectivity technology | Wireless |
| Impedance | 4 Ω |
| Interface | USB |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN | Yes |
| Product color | Black |
| Audio formats supported | AAC, MP3, WAV, WMA |
| Power requirements | 100 - 240 V, 50/60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 37 W |
Weight and Dimensions| Depth | 226 mm |
|---|---|
| Width | 380 mm |
| Height | 126 mm |
| Weight | 6700 g |
To Next Page
