Why won't my Denon S-52 play MP3 or WMA files?
If your Denon Media Converter can't play MP3 and WMA files, the file formats, extensions, or settings used when creating the disc might not be compatible with the S-52. Create discs with compatible file formats, extensions, or settings.
What does 'NO SIGNAL' mean on my Denon S-52 in XM mode?
If “NO SIGNAL” is displayed in the XM mode on your Denon Media Converter, the XM Mini-Tuner may not be receiving the XM satellite signal. Check for obstructions blocking the XM antenna's view of the satellites and reposition the antenna for better signal reception.
How to brighten the display on my Denon Media Converter?
If the display on your Denon Media Converter is dim, the dimmer function might be activated. Turn it off by pressing the DIMMER button.
What does 'CHECK XM TUNER' mean on my Denon S-52 Media Converter?
If “CHECK XM TUNER” appears in the XM mode on your Denon Media Converter, ensure the XM Mini-Tuner is fully seated in its dock and that the dock cable is connected to the S-52.
What to do if my Denon S-52 won't play a disc?
If the disc is not playing when you press the 1/3 button on your Denon Media Converter, the disc may be dirty or scratched. Wipe the dirt off the disc or replace it.
Why does my Denon S-52 Media Converter say 'Server Full' or 'Connection Down' for some radio stations?
If “Server Full” or “Connection Down” is displayed for some radio stations on your Denon Media Converter, the station is likely congested or not currently broadcasting. Wait a while before trying again.
What does 'CHECK ANTENNA' mean on my Denon Media Converter in XM mode?
If “CHECK ANTENNA” is displayed in the XM mode on your Denon Media Converter, check that the XM antenna is securely connected to the XM Mini-Tuner Dock and inspect the antenna cable for damage. Replace the antenna if the cable is damaged.
Checks for electrical safety and laser radiation compliance.
Important safety warnings and precautions for servicing.
Description of the initial value for laser drive current.
Procedure to check Iop and the replacement criterion.
Process for replacing the traverse unit.
Method for checking laser current (Iop) in test mode.
Precautions to prevent laser diode damage during handling.
Procedure for replacing the traverse unit based on Iop check.
Steps to diagnose and resolve LCD display problems.
Troubleshooting steps for playback and audio output problems.
Steps to diagnose and resolve connectivity problems.
Comprehensive lists of components for various PWB units.
Schematic showing connections for the S-32 model.
Schematic showing connections for the S-52 model.
Guidelines for checking waveforms on the FEP and test points.
Diagrams showing expected waveforms for RF, CD loading, CD play, and power amp signals.
Detailed circuit diagrams for the main unit and its blocks.
General| RMS rated power | 20 W |
|---|---|
| Connectivity technology | Wireless |
| Impedance | 4 Ω |
| Interface | USB |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN | Yes |
| Product color | Black |
| Audio formats supported | AAC, MP3, WAV, WMA |
| Power requirements | 100 - 240 V, 50/60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 37 W |
Weight and Dimensions| Depth | 226 mm |
|---|---|
| Width | 380 mm |
| Height | 126 mm |
| Weight | 6700 g |
To Next Page
