86
BHT-904B/BHT-914B
Select “3: BHT-Ir Protocol” at the PROTOCOL TYPE menu to display the
screen on the right.
nter the ID number of the BHT using the numeric keys and then press
.
If there is no need to edit the current setting, press the ENT key only.
P The entry range is from
00001 to 65534. If the entry value is less than five digits, the ENT key will be invalid.
E
the ENT key
oint ID numbers should consist of a five-digit decimal character string.
t entry is made, press the Backspace/clear key to delete it
an
Pr to the SET COMMUNICATION
m
If an incorrec
d then enter the correct data.
ess the Backspace/clear key to return
enu.
To Next Page
Loading...
