18
• "MEASURING METHOD"
Select a new measuring method.
Press the SET-key and select between individual measurements and measuring se-
ries. Use the START / STOP-key to return to the menu.
• "MEASURING UNIT"
Select a measuring unit.
Press the SET-key and use the UP or DOWN arrows to select a new measuring unit.
Confirm selection with SET-key. Use the START / STOP-key to return to the menu.
• "LANGUAGE"
Select a language.
Press the SET-key and use the UP or DOWN arrows to select a new language. Con-
firm selection with SET-key. Use the START / STOP-key to return to the menu.
4. If the measuring instrument is not used for 5 minutes, the system goes back into
standby-mode.
5. Use the Reset-key at any time to restart the measuring instrument.
This is necessary when the ME5000 does not react after pushing a button.
To Next Page
Loading...