Despatch LAC-6 Series - Wiring & Power Connections; Figure 5. LAC-6 Series Oven Nameplate

ASSEMBLY & SETUP LAC Series Oven Owner’s Manual
22 Version 106
Copyright © 2011 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
4.2.3. Wiring & Power Connections

Read the Model LAC-6 name plate (top of oven or top of control
area under the door) for proper power requirements before
proceeding with wiring and power connections (Figure 5).
Danger!
All grounding and safety equipment must be in compliance with
applicable codes, ordinances and accepted safe practices.
Models LAC 1-10, 1-38A, 1-38B, and 1-67 come equipped with an appropriate plug and
cord. Models LAC 2-12 and 2-18 must be hardwired to the electric supply using 10 AWG
or larger wires suitable for at least 75 °C (167 °F).
Figure 5. LAC-6 Series Oven Nameplate.