10
7. If the user does not step off the scale, the scale will go back to clock mode automatically.
(Fig.9: Clock and temperature
)
(Fig.13 12/24 with C/F toggle)
(Fig.11:User Setting)
1. During the remote is in Memory Recall Mode, press [UP]/[DOWN] keys to select user and press
[SET] key to go into this User Setting Mode in order to edit the user record.
2. User may set the height, age, and gender (Fig11.).
1. The clock and the temperature will be displayed toggle every 5 seconds as Fig.12
2. Press <CLOCK> to toggle the display of 12/24hour (optional) or Fahrenheit/Celsius(Fig.13).12
hours and Fahrenheit are default setting
1. Having entered all items, the data is stored into the EEPROM.
User Setting Mode
Clock Mode
To Next Page
Loading...
