Detecto MedVue MV1 User Manual

8555-M512-O1 Rev E y MedVue MV1 Owner’s 39
CALIBRATION SETUP, CONT.
T
TIME SETTINGS
With TIME SETTINGS displayed, press the ENTER key.
The display will change to YEAR [YYYY]. Proceed to the YEAR [YYYY] (Year) parameter.
Otherwise, press the ID/HEIGHT key to return to the
SCALE menu.
YEAR [YYYY]
(Year)
The display will show YEAR [YYYY] and the current setting. If the value displayed is
acceptable, press the ENTER key to save it. Otherwise use the numeric keys to enter a new
value, and then press the ENTER key to save it.
Allowable values are 2012 through 2099.

MONTH [1-12]
(Month)
The display will show MONTH [1-12] and the current setting. If the value displayed is
acceptable, press the ENTER key to save it. Otherwise use the numeric keys to enter a new
value, and then press the ENTER key to save it.
Allowable values are 1 through 12.
1 = January 5 = May 9 = September
2 = February 6 = June 10 = October
3 = March 7 = July 11 = November
4 = April 8 = August 12 = December
dAY [1-31]
(Day)
The display will show dAY [1-31] and the current setting. If the value displayed is
acceptable, press the ENTER key to save it. Otherwise use the numeric keys to enter a new
value, and then press the ENTER key to save it.
Allowable values are 1 through 31.
HOUR [0-23]
(Hour)
The display will show HOUR [0-23] and the current setting. If the value displayed is
acceptable, press the ENTER key to save it. Otherwise use the numeric keys to enter a new
value, and then press the ENTER key to save it.
Allowable values are 0 through 23.
NOTE: The hour is entered in a 24-hour format. When entering the hour after noon
(12:00 PM), you must add 12 to time. For example, 3:00 PM would be entered as 15.
MINUTE [0-59]
(Minutes)
The display will show MINUTE [0-59] and the current setting. If the value displayed is
acceptable, press the ENTER key to save it. Otherwise use the numeric keys to enter a new
value, and then press the ENTER key to save it.
Allowable values are 0 through 59.
SECONd [0-59]
(Seconds)
The display will show SECONd [0-59] and the current setting. If the value displayed is
acceptable, press the ENTER key to save it. Otherwise use the numeric keys to enter a new
value, and then press the ENTER key to save it.
Allowable values are 0 through 59.

Detecto MedVue MV1 Specifications

General

Brand	Detecto
Model	MedVue MV1
Category	Accessories
Language	English