8555-M512-O1 Rev E y MedVue MV1 Owner’s 40
CALIBRATION SETUP, CONT.
2
(Use 24 Hour Time Format)`
The display will show 24 HOUR TIME and the current setting. If the value displayed is
acceptable, press the ENTER key to save it. Otherwise, use the numeric keys 0/NO or
1/YES to select a new setting, and then press the ENTER key to save it.
Allowable values are YES or no.
YES = Use 24 Hour Time Format
(3PM displays 15:00)
no = Use 12 Hour Time Format
(3PM displays 3:00)
Calibration Setup is Complete
The Calibration Setup process has been completed. The MV1 will reset and return to the
weight mode. Press the ON/OFF key to turn the MedVue off. Re-install the end cap and secure
with the two (2) screws removed earlier. The MV1 is now ready for normal operation.
To Next Page
Loading...
Need help?
General