22
External Audio Devices Telephone’s Functions and Features
In order to plug in a keypad module,
you must first unplug your system
terminal’s U
pn
cable. Although
adapters can be plugged in during
operation, this is not permissible for
keypad modules.
Selecting the Function
Level
You switch levels by using the level
key at the lower right. The
icons in the top line of the display
tell you which level is set.
Operating the Keys
The keys of the OpenPhone 65 are
operated in the same way as pro-
grammed keys, as described in this
User Guide (see Programming a Des-
tination starting on page 68, Pro-
gramming Functions starting on
page 68, Programming the Call Keys
starting on page 48).
Before programming a key, you
must always select the desired level.
All MenuCard displays related to the
keys of an add-on device are shown
in the display of the basic device.
Note: Team keys can be pro-
grammed on the first level of the first
keypad module only.
External Audio Devices
Configuring Audio
Devices on an
OpenPhone 63 or an
OpenPhone 65
You use the
7 Audio adapter
menu in the
Phone settings
menu group to configure and acti-
vate the audio devices connected to
your system telephone
.
In the
Main menu
you select
4 Phone settings
, then
7 Audio adapter
, followed by …
■ Under the menu item
1 Add-
on selection
you enter the
type of analogue audio device
connected to socket 1, or deacti-
vate the socket. Select the type
of device that is to be activated
(
ear cap
,
second handset
,
headset
,
active speaker
box
or e
xt. microphone).
Select off
to temporarily de-
activate the socket.
op6365_gb.book Seite 22 Mittwoch, 28. August 2002 11:09 11
To Next Page
Loading...