DETEWE OpenPhone 63 - Remote-Programmable Voicebox Configuration and Query

52
Remote-Controlled Functions
or delete call forwarding Immediate
for your own telephone number
from a remote location.
This remotely programmed forward-
ing overwrites any other internally
active forwarding. Forwarding On
Busy and After Delay are not af-
fected. Incorrect or non-existent
telephone numbers are rejected.
Your authorisation is checked in the
same way as for forwarding within
the OpenCom 100. A correct entry is
confirmed with a positive acknow-
ledgement signal and the external
call subsequently ended.
Note: The procedure is aborted if
there is a pause of longer than 60
seconds between the entry of two
digits. With this (now extended) dura-
tion, remote-controlled functions us-
ing GSM cell phones can also be real-
ised.
Remote-programmable
Voicebox Configuration
and Query
If the system administrator has con-
figured remote query authorisation
for your voicebox, you can query and
configure your voicebox from an ex-
ternal location:
■ Using the OpenVoice tele-
phone number (this number is
included in the incoming call
distribution) …
you dial the MSN or the system
number assigned by the system
administrator to the OpenVoice
internal number.
■ Using your own telephone
number (this number is included
in the incoming call distribution,
and you have activated call for-
warding for this telephone to
the voicebox) …
you dial the MSN or the direct
dialling in number under which
you can be reached by external
callers.
Note: For detailed information on
the utilisation and operation of Open-
Voice, please refer to the add-on
guide“OpenVoice – The Voicemail
System in the OpenCom 100 Commu-
nications System”.
op6365_gb.book Seite 52 Mittwoch, 28. August 2002 11:09 11