61
Features and MenuCards Main Menu
7 Audio adapter:
In order to
configure and activate the external
audio devices connected to your
system telephone, you use
1 Add-
on selection
to select the type of
analogue device connected to
socket 1 (
earcap
,
second
handset, headset
,
active
speaker box
or
ext. microphone),
or deacti-
vate the socket with
off
.
You use
2 Add-on volume
to ad-
just the volume of the device. Use
3 Relay selection
to select the
type of device connected via a relay
to socket 2 or socket 4. You can se-
lect either
Record
(recording equip-
ment connected to socket 2) or
Door display
(the “Door busy” in-
dicator connected to socket 4). Se-
lect
off
to deactivate the socket.
You can activate or deactivate some
external audio devices directly via
the following menu items (each with
the options
on
or
off
):
4 Door display
5 Record
6 Second handset
7 Headset
8ƒDisplay
: Select
1 Contrast
or
2 Language
. With
Contrast
you
can adjust the display contrast by us-
ing the plus/minus key (or
one of the digits from to
). With
Language
you can
set the language used on the display
by selecting one from the list pro-
vided.
If your OpenPhone 65 system tele-
phone has one or more keypad mod-
ules added on, you can set the dis-
play contrast for each keypad
module separately. Select
1 Contrast
, then select the de-
sired
Keypad module
from the fol-
lowing menu. You set the display
contrast in levels, using the plus/mi-
nus key , or you enter one of
the digits from to .
MenuCard “Protection”
1ƒCall prot. phone
: This
switches call signalling (for all calls,
for internal calls only or for external
calls only) of all your terminal’s num-
bers
On
/
Off
(with the exception of
VIP and hunt group calls). A caller
continues to hear the idle tone. The
most recently activated call protec-
tion appears in the first line. In order
to change this, you select ,
then the desired type of protection
(
int. / ext. calls
,
Internal calls
or
External calls
). Confirm your
choice with
and activate the
function with
on
.
Note: If your internal phone
number is configured on more than
one terminal, call protection is acti-
vated on the other terminals as well.
2ƒCall prot. key
: You can con-
figure call protection separately for
the trunk keys on your telephone,
and switch (acoustic) call signalling
op6365_gb.book Seite 61 Mittwoch, 28. August 2002 11:09 11
To Next Page
Loading...
