57
Features and MenuCards Main Menu
vated,
Immediately
is given prior-
ity.
Note: All calls for the telephone
numbers of your terminal are for-
warded (with the exception of hunt
group numbers). If a number is stored
on more than one terminal, then calls
made to any of the other terminals
will be forwarded as well.
“Divert MSN” is available for ISDN
multi-terminal accesses. For each
MSN you can use this form of call for-
warding to forward incoming exter-
nal calls to external destinations, if
you have the relevant authorisation.
“Divert door” is available for door
calls. Providing you have the rele-
vant authorisation, you can use a
menu to forward door calls signalled
on your telephone to another (inter-
nal or external) telephone. This new
setting then applies to the entire
system.
1ƒDivert device
: Select
Immediately
,
After
delay
or
Busy
for the forwarding mode. Then
key in the destination (
Dest.:
).
After selecting
Internal calls
,
you can determine whether
Internal calls
,
External
calls
or
Int./ext.calls
are
forwarded to the destination
(
Dest.:
).
You enter the destination under
Dest.
as follows:
■ In the case of external tele-
phone numbers, you can enter
the number directly if external
line seizure is automatic; if ex-
ternal line seizure is manual, on
the other hand, you enter the
number after keying in the ex-
ternal line seizure code digit (the
presetting is ) .
■ In the case of internal telephone
numbers, you enter the number
directly if external line seizure is
manual, if external line seizure is
automatic, on the other hand,
you enter the number after
pressing the star key twice
.
Activate the function with
On
.
2ƒDivert key
: From the list,
select the key to which the internal
telephone number that is to be for-
warded has been assigned. Select
Immediately
,
Busy
or
After
delay
for the forwarding mode.
Then key in the destination
(
Dest.:
). After selecting
Internal
calls
, you can deter-
mine whether
Internal calls
,
External calls
or
Int./ext.
calls
are forwarded to the destina-
tion (
Dest.:
).
■ In the case of external tele-
phone numbers, you enter the
number directly if external line
seizure is automatic; if external
line seizure is manual, on the
other hand, you enter the
op6365_gb.book Seite 57 Mittwoch, 28. August 2002 11:09 11
To Next Page
