ineo 223/283/363/423 1-63
1.19 Replacing consumables
1
When there are no more staples in the finisher, the following message appears.
d Reference
For details on the replacement procedure for finisher FS-527, refer to page 1-65 of this manual.
For details on the replacement procedure for saddle stitcher SD-509, refer to page 1-66 of this manual.
For details on the replacement procedure for finisher FS-529, refer to page 1-67 of this manual.
When the punch scrap box is full, the following message appears (If it can be emptied by the user).
d Reference
For details on the emptying procedure, refer to page 1-68 of this manual.
To Next Page
Loading...