Basic box operation (saving data in a user box)
2
2-28 ineo+ 220/280/360 (Version 3)
2.6
3 Check the name of the document.
% The document name automatically set as the default is displayed.
% To change the document name, press [Document Name], and then use the keyboard that appears
in the touch panel to type in the name.
% To specify settings such as the image quality and document orientation, press [Scan Settings] or
[Original Settings]. For details, refer to chapter 6 of the [User’s Guide Box Operations].
4 Position the document to be saved.
5 Press the [Start] key.
To Next Page
Loading...
