Basic box operation (saving data in a user box)
2
2-26 ineo+ 220/280/360 (Version 3)
2.6
3 Check the name of the document.
% The document name automatically set as the default is displayed.
% To change the document name, press [Document Name], and then use the keyboard that appears
in the touch panel to type in the name.
4 Position the document to be saved.
5 Press the [Start] key.
% When saving a document to a user box with a Fax/Scan mode function, specifying another
destination allows the document to be sent at the same time that it is saved.
d Reference
A user box registered in the address book or registered as a group destination is called a "user box
destination".
Data can also be saved in a user box by specifying a user box destination as the recipient of the fax or scan
data. For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations].
To Next Page
Loading...
