You enter the settings by pressing
the pinhole with a small screw
driver, pencil, or needle, the display
now changes from temperature to
time display.
By using the arrow buttons ▲▼ you
move one way or the other in the
menu.
Setting the time
By pressing the • the hours start flash-
ing, indicating you can change them
with the arrow buttons ▲▼
Press the • again to change the
minutes.
Battery Backup: The current time and
day is kept for 80 days if mains supply
is off. All other settings are stored
permanently. Initially mains supply
the thermostat for 15 hours to fully
charge the battery.
Setting the weekday
By pressing the • the weekday starts
flashing, indicating you can change it
with the arrow buttons ▲▼ Press the •
to accept
Changing the settings
To Next Page
Loading...
