Setting the comfort
temperature
By pressing the • the preset comfort tempera-
ture starts flashing.
You change it with the arrow
buttons ▲▼
Press the • to accept
Setting the savings
temperature
By pressing the • the preset savings temperature
starts flashing. You change it with the arrow
buttons ▲▼
Press the • to accept
It can also be set to OFF.
Setting the minimum floor
temperature limit
If the thermostat is installed as a combination
of room and floor sensor the minimum comfort
temperature on the floor can be selected.
Setting this will overrule any other set point as
you always want e.g. 20°C at the floor sensor
--.-° means that the function is disabled.
By pressing the • the preset minimum floor limit
temperature starts flashing.
You change it with the arrow ▲▼
Press the • to accept
Changing the settings
To Next Page
Loading...
