Website: www.devicewell.com Email: support@devicewell.cn 16
Transition up: Click in the special effect control area (green light is displayed after
pressing), and then click or use AUTO or CUT to switch. The other three transition operations are
the same.
Transition down: Click in the special effect control area (green light after pressing), and
then click AUTO to switch.
Transition left: Click in the special effect control area (green light after pressing), then
click AUTO to switch.
Transition right: Click in the special effect control area (green light after pressing), and
then click AUTO to switch. The effect is shown below.
Wipe up the transition effect, the A picture is unchanged, and the B
picture is gradually wiped in by the upward direction until the
picture completely becomes B
Wipe the transition effect to the left, the A picture is unchanged, and
the B picture is gradually drawn in to the left until the picture
completely becomes B
Wipe the transition effect to the left, the A picture is unchanged, and
the B picture is gradually drawn in to the left until the picture
completely becomes B
To Next Page
Loading...
