Website: www.devicewell.com Email: support@devicewell.cn 18
PIP size and position
STILL screen freeze effects
Screen freeze special effect: Press on the control panel (green light is displayed after
pressing), and then the output PGM video animation will enter the freeze phenomenon. Press
the button again to unfreeze the screen, the effect is shown below.
At this time, the information on the
LCD screen will be switched to the
PIP setting. The control menu key can
be set according to requirements, as
shown below.
You can use the menu to set the parameters of PIP picture-in-picture, the situation is as follows
(the horizontal / vertical position size is based on the smallest display image as an example)
Horizontal position setting: The value from the upper left end to the upper right end is 0-1440,
and the value increases / decreases by 10 each time the menu is rotated.
Vertical position setting: The value from the upper left end to the lower left end is 0-810, and the
value increases / decreases by 10 each time the menu is rotated.
Display size setting: You can choose small / medium / large settings.
Bezel switch settings: You can choose on / off settings.
Border width setting: The border width can be selected from 2-7 thickness borders, and the value
increases / decreases by 1 each time the menu is turned.
Border color setting: You can choose white / red / green / green to set the border color.
To Next Page
Loading...
