HW008 Folding Scooter Owner’s Handbook Page 14
Appendix B: Quick Start Guide
For safety reasons, the auto-folding scooter is
shipped with the Lithium battery disconnected.
Step 1:
Place the scooter on the floor.
Connect the blue battery connectors together.
Press the green button to unfold.
There should be sufficient power in the battery to
unfold the scooter. However, the battery has been
stood and is completely flat refer to the Emergency
Charging Procedure in the handbook.
Step 3:
Position the battery in to the battery compartment
and secure with the velcro straps supplied (as
shown below). Replace the compartment cover.
Step 2:
Once the scooter has fully unfolded, also connect
the black battery charger connectors together.
Step 4:
Plug the charger in to the charging point (arrowed)
and then plug the charger in to the mains then
switch on the charger. Ensure the scooter is fully
charged before use.
To Next Page
Loading...
