DeVilbiss DV54 SLEEPCUBE AUTOADJUST User Manual (English)

Questions and Answers:

J
joneskarenAug 15, 2025
How to fix a DeVilbiss DV54 SLEEPCUBE AUTOADJUST Medical Equipment when nothing shows on the display?
- J
  Jill HowellAug 15, 2025
  If nothing is showing on the DeVilbiss Medical Equipment display, first, check that the power cord is fully connected to both the device and the power outlet. If you're using a DC power source, ensure those connections are secure and the battery is charged. Also, if you are using an optional humidifier, make sure that the flow generator is fully seated on the humidifier cradle. Finally, ensure the power outlet is functioning correctly.
B
bradshawkimberlyAug 19, 2025
What to do if the DeVilbiss Medical Equipment airflow stops or reports mask leak?
- N
  nherreraAug 19, 2025
  If airflow unexpectedly stops during use or the DeVilbiss Medical Equipment reports a mask leak, first, make sure your mask fits well by adjusting it and the headgear. If your mouth opens during use, consider using a chin strap or a different mask. Also, check that the optional humidifier chamber is correctly engaged and that the air supply port plug is fully inserted into the back of the CPAP.
N
Natalie GarzaAug 22, 2025
Why doesn't my DeVilbiss SleepCube start when breathing into the mask?
- M
  martinheatherAug 22, 2025
  If your DeVilbiss Medical Equipment SleepCube doesn't start when breathing into the mask, ensure the Auto-ON feature is enabled; if not, use the ON/OFF button. Verify the power cord is firmly connected. Breathe deeply to activate the Auto-ON feature. If using a full face mask with an anti-asphyxia valve, the Auto-ON may not work, so use the ON/OFF button. Also, confirm the air supply port plug is fully inserted and the humidifier chamber is correctly engaged.
R
Renee CarrAug 25, 2025
Why is the air from my DeVilbiss DV54 SLEEPCUBE AUTOADJUST flow generator too warm?
- S
  Samantha SchroederAug 26, 2025
  If the air from your DeVilbiss Medical Equipment flow generator feels too warm, start by cleaning the air filters and unblocking the air inlet port. Ensure the room temperature is not too high and the device is away from any heat sources. If you're using a humidifier, try lowering its heater setting.
S
sarahleblancAug 28, 2025
How to stop water condensation in DeVilbiss Medical Equipment hose?
- C
  Christopher GreenAug 28, 2025
  If water condensation is collecting in the hose of your DeVilbiss Medical Equipment, causing a gurgling sound, reduce the humidifier heater setting. Also, try to maintain a more stable room temperature.
L
Lauren TuckerSep 1, 2025
How to prevent skin irritation from DeVilbiss Medical Equipment mask?
- K
  Kara BowmanSep 1, 2025
  If your skin becomes irritated where the mask contacts your face while using the DeVilbiss Medical Equipment, try loosening the headgear to reduce pressure.
M
Michelle JacksonSep 4, 2025
How to treat dryness of throat or nose with DeVilbiss DV54 SLEEPCUBE AUTOADJUST Medical Equipment?
- D
  Daniel CharlesSep 4, 2025
  If you experience dryness of the throat or nose while using the DeVilbiss Medical Equipment, add a DeVilbiss DV5 heated humidifier or increase the heater setting on your current humidifier.
N
Nicole BaileySep 7, 2025
Why is the heater setting not visible on my DeVilbiss DV54 SLEEPCUBE AUTOADJUST display?
- K
  Katie HoltSep 7, 2025
  If the heater setting is not visible on the display of your DeVilbiss Medical Equipment, ensure the flow generator is fully seated onto the humidifier cradle.
C
christinacontrerasSep 12, 2025
What to do for nasal or ear pain with DeVilbiss DV54 SLEEPCUBE AUTOADJUST Medical Equipment?
- K
  Kayla GilbertSep 12, 2025
  If you experience nasal, sinus, or ear pain, or a runny nose while using the DeVilbiss Medical Equipment, discontinue use.

DeVilbiss DV54 SLEEPCUBE AUTOADJUST Specifications

General

Pressure Range	4-20 cm H2O
Auto Adjust	Yes
Altitude Adjustment	Automatic
Sound Level	26 dBA
Mask Fit Indicator	Yes
Leak Compensation	Yes
Type	CPAP
Modes	CPAP
Data Storage	SD Card
Humidification	Optional Heated Humidifier
Power Supply	100-240V, 50-60Hz
Ramp	0 to 45 min (5-min increments)