What to do if nothing shows on the DeVilbiss Medical Equipment display?
If nothing is showing on the display of your DeVilbiss Medical Equipment, first ensure the device is plugged in and the power cord is fully inserted into both the device and the power outlet. If it still doesn't work, check that the power outlet is functioning correctly by testing it with another device.
Why has the airflow stopped unexpectedly during use of my DeVilbiss DV55 Bilevel Medical Equipment?
The airflow in your DeVilbiss Medical Equipment might have stopped unexpectedly due to the Auto-OFF feature detecting a large airflow, possibly because of a loosely fitting mask. Make sure you have a good mask fit by adjusting the mask and headgear as needed. Alternatively, if you begin to breathe through your mouth during use, this can also cause airflow to stop. In this case, it's recommended to contact your home care provider for a chin strap or a different mask to help prevent mouth breathing. If the problem persists, consider disabling the Auto-OFF feature in the Advanced Menu options.
What to do if my DeVilbiss DV55 Bilevel Medical Equipment doesn't start when breathing into the mask?
If your DeVilbiss Medical Equipment isn't starting when you breathe into the mask, it could be due to several reasons: * The Auto-ON feature might be disabled, so use the ON/OFF button to start the device. * Check that the power cord is firmly connected to the device and the power outlet. * Your breath might not be deep enough for the Auto-ON feature to detect, so try breathing deeply in and out. * If you're using a full face mask with an anti-asphyxia valve, the Auto-ON feature may not work; use the ON/OFF button instead. * Ensure the air supply port plug is fully inserted into the unit. * Confirm the humidifier chamber is fully engaged into the cradle and the latching lever snaps into place.
How to fix dryness of throat or nose using DeVilbiss DV55 Bilevel?
If you're experiencing dryness of the throat or nose while using your DeVilbiss Medical Equipment, it may be due to inadequate humidity. You can add a DeVilbiss DV5 Heated Humidifier to your equipment. Also, consider increasing the heater setting on the humidifier to provide more moisture.
What to do if the display shows a device fault on my DeVilbiss DV55 Bilevel?
If the display on your DeVilbiss Medical Equipment shows a device fault, it indicates that an error has occurred within the device that requires servicing. Contact your home care provider for assistance.
How to stop condensation of water collecting in the hose of my DeVilbiss Medical Equipment?
If condensation is collecting in the hose of your DeVilbiss Medical Equipment, causing a gurgling noise, it's likely due to a humidification setting that is too high. Try reducing the humidifier heater setting and/or increasing the temperature of the room. The issue may also arise if the room temperature fluctuates from higher to lower levels through the night, so maintaining a consistent room temperature can help.
What to do if symptoms of OSA have recurred using DeVilbiss DV55 Bilevel?
If symptoms of OSA (Obstructive Sleep Apnea) have recurred while using your DeVilbiss Medical Equipment, it could be due to a couple of reasons. First, the air filter may be blocked. Clean or replace the air filter and relocate the device away from drapes and other dusty surfaces. Second, it's possible that your sleep apnea condition has changed, so you should contact your physician.
What to do if my skin becomes irritated where the mask touches my face from DeVilbiss DV55 Bilevel?
If your skin becomes irritated where the mask touches your face while using DeVilbiss Medical Equipment, it could be because the headgear is too tight or improperly adjusted. Try loosening the headgear to reduce the contact pressure on your face. Also, your mask may not be properly sized or the most appropriate shape for you, in which case you should contact your physician or home care provider.
General| Brand | DeVilbiss |
|---|---|
| Model | DV55 Bilevel Series |
| Category | Medical Equipment |
| Language | English |
To Next Page