EasyManua.ls Logo

DeVilbiss DV55 Bilevel Series - Shut down; Advanced Menu Controls

DeVilbiss DV55 Bilevel Series
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
A-DV56
EN
ADVAnceD menu controls
NOTEIf you are unable to change the delay time, your provider has locked this setting. Refer
to the keypad menu guide on page 14 for details.
Comfort delay is available in both IntelliPAP Standard and IntelliPAP Bilevel models, and in all
modes of operation.
Comfort Delay Feature In Standard CPAP Mode
When you use the comfort delay feature while your device is operating in CPAP mode, the
airow you receive at the beginning of your therapy is temporarily lowered to a pressure
selected by your physician when the device was setup.
Press the delay button to activate the comfort delay feature. The airow pressure will drop to
the prescribed comfort delay pressure.
The pressure will gently rise to the pressure prescribed for your therapy. You may repeat
the comfort delay by pressing the delay button again if you have not fallen asleep during the
first use.
Comfort Delay Feature in Bilevel Mode
When you use the comfort delay feature while your IntelliPAP is operating in Bilevel mode,
the airow you receive at the beginning of your therapy is the delay pressure prescribed by
your physician when the device was setup. The airow pressure will start at the delay
pressure and gradually rise to the prescription setting. In Bilevel mode, the IPAP and EPAP
pressures will gradually rise until they reach the prescription settings.
Shut Down
Press the ON/OFF button to turn the device off. You may also simply remove your mask.
After a few seconds the device will display the message “Mask Off. Please check mask fit.” If
you do not put the mask on again the device will automatically turn off in about 20 seconds.
Pressing any button will remove the message from the display.
NOTE
If the DeVilbiss IntelliPAP does not turn off automatically, the AutoOFF feature may
have been disabled. In this case you must manually turn the device off.
aDVanCeD menU ConTRols
With the device on, press the “Next” or “Previous” buttons on the keypad to scroll through
the items on the display. Not all of the features in the table below are available in all models;
some are optional and some depend on what your physician and/or home care provider has
selected. The table shows the items you may see, and describes the feature associated with
each item. Also, some features are only available in Bilevel Mode or with the DeVilbiss

Table of Contents

Related product manuals