HW008 Folding Scooter Owner’s Handbook Page 7
x Battery Gauge. The battery gauge on the tiller
console lights LEDs to show remaining power:
Green (3 or 4 LEDS lit) - 40% - 100% capacity
Yellow (2 LEDs lit) - draining charge (10% - 30%)
Red (1 LED lit) - immediate recharge is necessary.
The remaining power indicated by the battery gauge
will vary by the driving time incurred and how you
drive. Repeated starting, stopping and climbing will
consume power more quickly.
x Starting and Driving
1. Make sure the scooter is fully folded out. Failure
to do so can affect the handling of the scooter.
2. Make sure the tiller has been secured properly.
3. Switch the key ignition on.
4. Check the battery gauge to check there is enough
power for your journey. If you have any doubt
about the remaining power, recharge the battery
pack before use.
5. Set the speed dial to a position you feel safe and
comfortable with.
6. Check the wigwag paddle and automatic brake
work correctly.
7. Before driving, check the environment around you
is safe for you to drive.
Be careful whilst driving in heavy traffic or
crowded areas. Whilst reversing the vehicle,
be aware of people or objects behind you.
x Stopping
1. Release the wigwag paddle completely. The
vehicle will automatically brake and stop.
2. Switch the scooter off at the key ignition and pull
out the key.
Stopping distance will vary with speed so
begin braking as early as possible.
Always park on flat ground, switch off and
remove the key before dismounting.
To Next Page
Loading...
