Network configuration 38
devolo dLAN WiFi Outdoor
Restoring the device configuration
An existing configuration file can be sent to the
dLAN WiFi Outdoor in the System Configurati-
on area and enabled there. Select a suitable file via
the Select file ... button and start the operation by
clicking the Restore button.
Resetting the device configuration
The dLAN WiFi Outdoor is reset to the original fac-
tory defaults in the System Configuration area
with the Reset Configuration option.
Doing so causes you to lose your personal WiFi
and PLC settings. The last-assigned passwords
for the dLAN WiFi Outdoor are also reset.
For backup purposes, all active configuration set-
tings can be transmitted to your computer, stored
there as a file and reloaded into the
dLAN WiFi Outdoor. This function can be useful for
creating a variety of configurations that will let you
quickly and easily set up the device for use in diffe-
rent network environments.
Reboot device
In order to reboot the dLAN WiFi Outdoor, select
the Reboot button in the System Configurati-
on area.
4.7.4Firmware
The firmware of the dLAN WiFi Outdoor includes
the software for operating the device. If necessary,
devolo offers new versions on the Internet as a file
download, for example to modify existing functi-
ons.
Current firmware
The currently installed firmware of the
dLAN WiFi Outdoor is displayed here.
Searching for and updating firmware
automatically
The adapter
can also look for up-to-date firmware
automatically. To do this, enable the Regulary
check for firmware updates option.
The dLAN WiFi Outdoor lets you know when a
new firmware version becomes available. The
option is enabled by default.
The Automatically install firmware updates op-
tion allows the adapter to automatically install the
firmware it has found.
The dLAN WiFi Outdoor automatically updates
its firmware. The option is enabled by default.
Download updated firmware
dLAN WiFi Outdoor.book Seite 38 Mittwoch, 30. Oktober 2019 10:47 10
To Next Page
Loading...
