DeWalt 208-DS - Warranty

47
TO QUALIFY FOR THIS WARRANTY
(1) Machine must be registered within 30 days from the time of purchase on a form
provided by DEWALT. Your DEWALT Distributor is responsible for the registration
of your machine. Please cooperate with your Distributor in supplying necessary
information on the card.
(2) The machine must have been purchased from DEWALT or an authorized DEWALT
Distributor.
(3) This warranty extends to the original purchaser only and is not transferable to
subsequent owners.
TIME PERIODS
TWO (2) YEAR WARRANTY - For the DEWALT 208-DS Drum Sander. Warranted to be free
from defects in material and workmanship for a period of two (2) years from the date of
purchase by the original owners. (See Exclusions)
EXCLUSIONS (Not Covered by Warranty)
(1) Expendable wear items and parts that fail through normal wear by reason of their
characteristics (cords, pads, pad holders, belts, wheels, carbon motor brushes, bulbs,
filters, bags, or other consumable parts).
(2) This warranty does not extend to parts affected by misuse, neglect, abuse, accidents,
damage in transit, overloading the capacity of the machine, failure due to lack
of proper maintenance or care as described in the operating and maintenance
instructions. All defective parts must be returned to the distributor for credit.
(3) Minor adjustments, such as tightening of screws or bolts not connected with the
replacement of parts, are not covered.
(4) Repairs or alterations by an organization other than the factory or an Authorized
Service Center are not covered and will void any DEWALT warranty as to the parts or
systems repaired or altered by a non-authorized organization.
THE OBLIGATION OF DEWALT
(1) The obligation of DEWALT under this warranty is limited to repairing or replacing,
at its option, any part which is proven to be defective in material or workmanship
under normal use for the applicable period stated above.
(2) Warranty repairs will be made by your DEWALT Distributor without charge for parts
and labor. They will be compensated with a warranty labor rate of $75.00 per hour,
for the first year of ownership.
(3) Parts repaired or replaced under this warranty are warranted only during the balance
of the original warranty period. All defective parts replaced under these warranties
become the property of DEWALT.
WARRANTY SERVICE
To obtain warranty service, take your machine and proof of purchase to any authorized
DEWALT Distributor. DEWALT will not reimburse expenses for service calls or travel.
For the Distributor in your area, call DEWALT Customer Service Department at 1-800-
334-2248. If you are dissatisfied with the service that you receive, call or write DEWALT
Customer Service Department for further assistance.
INSTRUCTIONS AND CONDITIONS FOR WARRANTY REIMBURSEMENT
lOrder replacement part: Orders will be processed and charged, as normal procedure.
lCall DEWALT for R/A number.
lYou will need the Machine Serial Number and the Machine Model Number.
lParts must be returned, accompanied with the R/A number to be eligible for
warranty credit.
lAll Warranty Parts will be shipped prepaid UPS Ground, any other method will be at
the recipients expense.
lFreight on any Warranty Part after 30 days must be paid for by the Purchaser.
lWarranty labor rate is $75.00 per hour.
lCredit will be issued upon completion of the above steps, at the above rates.
Transportation of hazardous waste or contaminated equipment is subject to various laws
and regulations. In returning machines, parts, or accessories under this limited warranty,
the end user must certify in writing that the machines, parts, or accessories being returned
have not been used for handling, clean up, or disposal of hazardous waste or hazardous
materials including but not limited to such things as asbestos, anthrax etc. or if the machines,
parts, or accessories being returned have been used for handling, clean up, or diposal of
hazardous waste or hazardous materials, then the end user must have the machines, parts
or accessories decontaminated by licensed and qualied decontamination professionals
and provide written certication of this decontamination signed by the decontamination
professionals. These machines, parts or accessories are to be returned only to the local
DEWALT Service Center for warranty service along with decontamination certication.
DISCLAIMER OF CONSEQUENTIAL
THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION OF THE LIMITED
WARRANTIES STATED WITHIN. NO OTHER WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABLILITY
OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE EXCEPT AS EXPRESSLY STATED
HEREIN. ANY STATUTORY IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, THAT ARE IMPOSED BY LAW
DESPITE THE EXPRESS LIMITATION OR WARRANTIES ABOVE, ARE EXPRESSLY LIMITED TO
THE DURATION OF THE WRITTEN WARRANTY. BUYER UNDERSTANDS, ACKNOWLEDGES
AND AGREES THAT THE REMEDIES PROVIDED UNDER THIS LIMITED WARRANTY ARE THE
SOLE AND EXCLUSIVE REMEDIES AVAILABLE TO THE BUYER. DEWALT DISCLAIMS ANY
RESPONSIBLITY FOR LOSS OF USER TIME OF THE DEWALT MACHINE OR ANY OTHER
INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS INCLUDES, BUT NOT LIMITED TO
INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION
WITH THE FURNISHING, PERFORMANCE, USE OF OR INABILITY TO USE THE MACHINE.
ANY EXTENSIONS OF OR MODIFICATIONS MADE TO THIS WARRANTY BY A DEALER/
DISTRIBUTOR OF DEWALT ARE THE SOLE RESPONSIBILITY OF THE DEALER/DISTRIBUTOR.
DEWALT reserves the right to change its warranty policy without notice.
Copyright 2024 DEWALT
Limited Warranty
208-DS Drum Sander