DeWalt 208-DS - Introduction; Machine Specifications

6
INTRODUCTION
Model DXAS07058A DXAS07057A
Abrasive Size
8˝ x 19˝sleeve
(20.3 x 48.2 cm)
8˝ x 19-1/2˝ sheet
(20.3 x 49.5 cm)
Abrasive Rate 2830 ft/min (863 m/min) 2830 ft/min (863 m/min)
Drum Rate 1800 RPM 1800 RPM
Dust Control Rate 76 CFM 76 CFM
Drum Pressure 25 lbs (11.4 kg) 25 lbs (11.4 kg)
Leveling Controls Externally Adjustable Externally Adjustable
Operating Controls Lever Operated Lever Operated
Motor 1½ HP TEFC Thermally Protected 1½ HP TEFC Thermally Protected
Power Cable
40΄ (12.1m) 12 Gauge
Abrasive Resistant
40΄ (12.1m) 12 Gauge
Abrasive Resistant
Voltage Frequency 115 / 60 115 / 60
Amperage 12 12
Dimensions (in)*
21½˝ x 16˝ x 35½˝
(54.6 x 40.6 x 90.2 cm)
21½˝ x 16˝ x 35½˝
(54.6 x 40.6 x 90.2 cm)
Weight (lbs) * 125 (57 kg) 125 (57 kg)
* Shipping Value
Machine Specications
ENGLISH