English
9
WARNING: Burn hazard. Do not submerge the battery pack
in any liquid or allow any liquid to enter the battery pack. Never
attempt to open the battery pack for any reason. If the plastic
housing of the battery pack breaks or cracks, return to a service
center for recycling.
Storage Recommendations
1. The best storage place is one that is cool and dry, away from
direct sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool dry place out of the charger for optimal
results.
NOTE: Battery packs should not be stored completely depleted
of charge. The battery pack will need to be recharged before use.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
COMPONENTS (Fig. 2)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
A. Trigger switch G. Belt hook
B. Forward/reverse control button H. Mounting screw
C. Torque adjustment collar I. Bit clip
D. Gear shifter (Sold separately)
E. Worklight J. Battery release button
F. Keyless chuck K. Battery pack
A
B
C
FIG. 2
D
F
E
I
J
K
H
G
H
Variable Speed Trigger Switch (Fig. 2)
To turn the tool on, squeeze the trigger switch (A). To turn the tool
off, release the trigger switch. Your tool is equipped with a brake.
The chuck will stop as soon as the trigger switch is fully released.
NOTE: Continuous use in variable speed range is not recommended.
It may damage the switch and should be avoided.
Forward/Reverse Control Button (Fig. 2)
A forward/reverse control button (B) determines the direction of
the tool and also serves as a lock-off button.
To select forward rotation, release the trigger switch and depress
the forward/reverse control button on the right side of the tool.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
