DeWalt DCV586 - Package Contents and Intended Use; Dust Extractor Markings and Intended Use

10
ENGLISH
Battery Type
The DCV586M operates on a 54volt batterypack.
These battery packs may be used: DCB546, DCB547, DCB548.
Refer to Technical Data for moreinformation.
Package Contents
The package contains:
1 Dust extractor
1 Wireless Tool Control™ remote
2 Filters
1 Hose
1 Fleece bag
1 Charger (C, D, E, G, H, L, M, P, Q, S, T, U, X, Y, Z models)
1 Li‑Ion battery pack (C1, D1, E1, G1, H1, L1, M1, P1, Q1, S1, T1,
U1, X1, Y1, Z1 models)
2 Li‑Ion battery packs (C2, D2, E2, G2, H2, L2, M2, P2, Q2, S2,
T2, U2, X2, Y2, Z2 models)
3 Li‑Ion battery packs (C3, D3, E3, G3, H3, L3, M3, P3, Q3, S3,
T3, U3, X3, Y3, Z3 models)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by DeWALT is under license. Other trademarks and
trade names are those of their respectiveowners.
• Check for damage to the dust extractor, parts or accessories
which may have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Dust Extractor
The following pictograms are shown on the dust extractor:
Read instruction manual beforeuse.
Pairingsymbol.
x
Discard the battery pack with due care for
theenvironment.
y
Charge DeWALT battery packs only with designated
DeWALT chargers. Charging battery packs other than
the designated DeWALT batteries with a DeWALT
charger may make them burst or lead to other
dangeroussituations.
z
Do not incinerate the batterypack.
B
USE (without transport cap). Example: Wh rating
indicates 108Wh (1battery with 108Wh).
A
TRANSPORT (with built‑in transport cap). Example: Wh
rating indicates 3x 36Wh (3batteries of 36Wh).
Ø
20
Ø
32
Hose diameter switchpostions.
Acoustic alarm
Low battery alarm
<20m/s
Flow rate alarm

WARNING: This machine contains dust hazardous to
health. Emptying and maintenance operations, including
removal of the dust collection means, must only be carried
out by authorised personnel wearing suitable personal
protection. Do not operate without the full filtration
systemfitted.
Class M dust extractors are suitable to extract dry,
non‑combustable dusts with workpace limit values
of ≥ 0.1 mg/m³.
Date Code Position (Fig.A)
The date code
22
, which also includes the year of manufacture,
is printed on top housing underhandle.
Example:
2022XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the dust extractor or any part of
it. Damage or personal injury couldresult.
1
Battery port
2
Dust extractor hose
3
Three position switch
4
Tank latches
5
Hose clips
6
Dust extractor head
7
Battery pack
8
Hose release latch
9
Hose inlet plug
10
TSTAK stacking latches
11
Wireless Tool Control™
pairing button
12
Fleece bag
13
Handle
14
Wireless Tool Control™
remote
15
Hose selection switch
Intended Use
This industrial dust extractor cleaner is intended for wet and dry
vacuum cleaningapplications.
The appliance can operate cordless by using the DeWALT 54V
Li‑ionbatteries.