4
ENGLISH
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice‑President Engineering, PTE‑Europa
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
01.12.2022
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
AND RADIO EQUIPMENT REGULATION 2017
Dust Extractor
DCV586M
DeWALT declares that these products described under Technical
Data are in compliancewith:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN60335‑1:2012 + A11:2014 + A13:2017; EN60335‑2‑69:2012.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(asamended).
Radio Equipment Regulations 2017, S.I. 2017/1206
(asamended):
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact DeWALT at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of DeWALT.
Karl Evans
Vice President Professional Power Tools EANZ GTS
DeWALT UK, 270Bath Road, Slough
Berkshire, SL1 4DX
England
01.12.2022
Congratulations!
You have chosen a DeWALT dust extractor. Years of experience,
thorough product development and innovation make DeWALT one
of the most reliable partners for professional power toolusers.
Technical Data
DCV586M
Voltage V
DC
54
Type 1
Battery type Li‑Ion
Degree of protection IPX4
Negative pressure kPa 8.8
Flow rate l/s 24.7
Container capacity l 11
Filling liquid max. l 7.5
Hose diameter mm 32
Hose length m 2.5
Weight (without battery pack) kg 8
Wireless Tool Control™ remote
N547456
Voltage V
DC
3
Battery Type CR2032
Frequency Band
Max Power (EIRP)
MHz
mW
433
0,03
Noise values and vibration values (triax vector sum) according to EN60335‑2‑69:
L
PA
(emission sound pressure level) dB(A) 69
L
WA
(sound power level) dB(A) 81.5
K (uncertainty for the given sound level) dB(A) 3.5
EC‑Declaration of Conformity
Machinery Directive
and Radio Equipment Directive
Dust Extractor
DCV586M
DeWALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN60335‑1:2012 + A11:2014 + A13:2017;
EN60335‑2‑69:2012.
These products also comply with Directive 2014/30/EU, 2014/53/EU
and 2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
English (original instructions)
DUST EXTRACTOR
DCV586M