DeWalt DCW604 - Plunge Router DCW600, DCW604 Overview; Welcome and Congratulations; Technical Specifications; Noise and Vibration Data

33
ENGLISH
EC-Declaration of Conformity
Machinery Directive
Plunge Router
DCW600, DCW604
DeWALT declares that these products described under Technical
Data are in compliancewith:
2006/42/EC, EN62841-1:2015 + AC:2015; EN62841-2-17:2017.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
08.11.2021
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
DCW600 DCW604
Voltage V
DC
18 18
Type 2 2
Battery type Li‑Ion Li‑Ion
No‑load speed rpm 16000–
25500
16000–
25500
Router carriage 1 column 2 columns
Router carriage stroke mm 55 55
Collet Size mm 8 8
Cutter Diameter, max 30 30
Weight (without battery pack) kg 1.54 2.40
Noise and/or vibration values (triax vector sum) according to EN62841‑2‑17:
L
PA
(emission sound pressure level) dB(A) 75 81
L
WA
(sound power level) dB(A) 86 92
K (uncertainty for the given sound
level)
dB(A) 3 3
Vibration emission value a
h
= m/s
2
<2.5 5.0
Uncertainty K = m/s
2
1.5 1.5
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
PLUNGE ROUTER
DCW600, DCW604