Dewetron DEWE-5000 - Page 21

21
DE-M040302E • DEWE-5000 • Technical Reference Manual • Printing version 2.2.3 • January 19, 2012
Main System
Modular smart interfaces to connect various sensors
Modular Smart Interfaces for DAQP / MDAQ modules, DEWE-43 and DEWE-101
MDAQ-SUB-STG-D
MDAQ-SUB-
BRIDGE-D
MDAQ-SUB-V-
200-D
DAQP-STG-D DAQP-LV-D DEWE-43 DEWE-101
MSI-BR-ACC
 
-

-
 
Isotron (constant current powered) adapter for MDAQ-SUB-BRIDGE / -STG modules with DB9 connector
Excitation current 4 mA at 21 V, High pass  lter 1.5 Hz, BNC connector
Bandwidth and ranges are de ned by connected ampli er
Automatic adapter identi cation
MSI-BR-V-200
 
-

-
 
200 V input adapter for MDAQ-SUB-BRIDGE / -STG modules with DB9 connector
Differential input con guration, BNC connector
Bandwidth and ranges are de ned by connected ampli er
Automatic adapter identi cation
MSI-BR-RTD
 
- not needed -
 
Pt100, Pt200, Pt500, Pt1000 and Pt2000 adapter for MDAQ-SUB-BRIDGE / -STG modules with DB9 connector
2, 3 and 4 wire connection methods, 5-pin Binder 710 series connector
Automatic adapter identi cation
MSI-BR-CH-x
 
-

-
 
Charge input interface for DAQP-STG and MDAQ-SUB-BRIDGE / -STG with DB9 connector
Range up to 50000 pC, AC coupled with 0.07 Hz, BNC signal connection
Max. 100 kHz bandwidth (dependent on the max. bandwidth of the ampli er)
Automatic adapter identi cation
MSI-BR-TH-x
 
-

-
 
isolated TC sensor any TC sensor isolated TC sensor
Thermocouple type K / J / T adapter for DAQP-BRIDGE-x and MDAQ-SUB-BRIDGE / -STG modules with DB9 connector
For use with isolated thermocouple sensors only ! (except in combination with DAQP-BRIDGE-A*)
High accuracy cold junction reference measurement, 1 m thermo cable with Mini TC connector
Automatic adapter identi cation
MSI-V-ACC
- -

-

- -
Isotron (constant current powered) adapter for DAQP-LV and MDAQ-SUB-V-200 modules with DB9 connector
Excitation current 4 mA at 21 V, High pass  lter 1.5 Hz, BNC connector
Bandwidth and ranges are de ned by connected ampli er
Automatic adapter identi cation
MSI-V-RTD
- -

-

- -
Pt100, Pt200, Pt500 and Pt1000 adapter for DAQP-LV and MDAQ-SUB-V-200 modules with DB9 connector
2, 3 and 4 wire connection methods, 5-pin Binder 710 series connector
Automatic adapter identi cation
MSI-V-CH-50
- -

-

- -
Charge input interface for DAQP-LV, MDAQ-SUB-V-200 modules with DB9 connector
Range up to 50000 pC, AC coupled with 0.07 Hz, BNC signal connection
Max. 100 kHz bandwidth (dependent on the max. bandwidth of the ampli er)
Automatic adapter identi cation