8514-296-001 REV K page 90
Water
leakage
around
loading door
Door Adjustment
Door may need adjustment due to abuse or wear. Check tightness
around perimeter using a dollar bill. Adjust left to right tightness by
shims at door lock or hinge side. It is important to center gasket to
tub opening before tightening door to hinge bolts. Chalk may be
used on tub front to show point of contact with tub. If gasket is
deformed, worn, or damaged, replace. Refer to parts section for
door gasket expander kit.
Signs of a
damaged E-
Stop button.
Stop button
Machine accepts coins, When machines starts the buzzer will sound
and then the machine stops. The display will then show “OPEN
DOOR”. Replace stop button.
To Next Page
Loading...
