Dexter Laundry WN0900 - Cylinder, Seals & Bearings Part # by Model

Cylinder, Seals & Bearings Part # by Model
Key Description T900 T1200 QTY
1 Housing, Bearing- Assembly (items #2-#6) 9803-187-001 9803-187-001 1
2 Housing, Bearing 9241-181-004 9241-181-004 1
3 Bearing, Front (LARGE) 9036-159-006 9036-159-006 1
4 Bearing, Rear (SMALL) 9036-159-005 9036-159-005 1
5 Spacer, Bearing 9538-170-001 9538-170-001 1
6 Ring, Bearing Retainer 9487-238-004 9487-238-004 1
7 Tub As sembly 9930-157-001 9930-154-001 1
8 Seal, Primary V85A 9532-140-007 9532-140-007 1
9 Seal, Secondary V140A 9532-140-008 9532-140-008 1
10 Ring, Seal Mounting 9950-052-001 9950-052-001 1
11 Tub Back Mating Ring 9487-266-001 9487-266-001 1
11G Mating Ring Guard Shield 9487-261-004 9487-261-004 1
12 Bolt, Tub End of Bearing Housing (7/16-14x1), Bolt from
inside Tub
9545-059-004 9545-059-004 6
13 Washer, Flat 8641-581-034 8641-581-034 6
14 Screw-Hex Cap, 3/4”-10 x 3” (Bearing Housing to Frame) 9545-057-002 9545-057-002 6
15 Washers Spherical 3/4 (Male half) (Bearing Housing to
Frame)
8641-588-001 8641-588-001 6
16 Washers Spherical 3/4 (Female half) (Bearing Housing to
Frame)
8641-588-002 8641-588-002 6
15 Washer, Flat 8641-581-034 6
16 Lock Washer-Extrernal Tooth, 3/4” (Bearing Housing to
Frame)
8641-582-020 6
17 Nut 3/4”-10 (Bearing Housing to Frame) 8640-418-003 8640-418-003 6
18 Pulley, Driven 9453-176-005 9453-176-005 1
19 Bolt, 3/8”-16 x 2” 9545-029-011 9545-029-011 3
20 Washer, 3/8” 8641-582-003 8641-582-003 3
21 Bushing Taperlock (Driven & Large 9053-078-002 9053-078-002 1
22 Washer-Flat .675x2-1/2x1/4 8641-581-043 8641-581-043 1
23 Lockwasher-Exttooth, 5/8 8641-582-018 8641-582-018 1
24 Bolt, 5/8-11x1 1/2 9545-060-001 9545-060-001 1
25 Tub & Cylinder Assy 9869-027-003 9869-022-003 1
82
Part # 8533-083-001 1/18
82